fluoride/fatigue

The link is saved to the clipboard

Choose sort type

Page 1 from 37 results

The effect on the fatigue strength of bone cement of adding sodium fluoride.

Only registered users can translate articles

New bone cements that include several additives are currently being investigated and tested. One such additive is sodium fluoride (NaF), which promotes bone formation, facilitating implant integration and success. The influence of NaF on the fatigue performance of the cement as used in biomedical

Radiopacity and fatigue characterization of a novel acrylic bone cement with sodium fluoride.

Only registered users can translate articles

Acrylic bone cement must provide good radiographic visibility and good long-term mechanical resistance in joint replacements. A new formulation of cement with 6% barium sulfate and 6% sodium fluoride was developed (Fluoride Bone Cement). Barium sulfate is a necessary addition to allow radiographic

Effects of welding pulse energy and fluoride ion on the cracking susceptibility and fatigue behavior of Nd:YAG laser-welded cast titanium joints.

Only registered users can translate articles

In this study, the cracking susceptibility and fatigue behavior of Nd:YAG laser-welded cast Ti joints (welding pulse energy: 11, 15, and 18 J) in fluoride-containing (0 and 0.5% NaF) artificial saliva were evaluated using constant elongation rate test (CERT) and fatigue test (FT), respectively. Both

In vivo skeletal imaging of 18F-fluoride with positron emission tomography reveals damage- and time-dependent responses to fatigue loading in the rat ulna.

Only registered users can translate articles

The skeletal response to damaging fatigue loading is not fully understood. We used (18)F-fluoride PET to describe the time course of the skeletal response following the creation of increasing levels of in vivo, fatigue-induced damage. The right forelimbs of 40 adult rats were loaded in vivo in

Fatigue and fluoride corrosion on Streptococcus mutans adherence to titanium-based implant/component surfaces.

Only registered users can translate articles

OBJECTIVE The influence of fatigue and the fluoride ion corrosion process on Streptococcus mutans adherence to commercially pure Titanium (Cp Ti) implant/component set surfaces were studied. METHODS Thirty Nobel implants and 30 Neodent implants were used. Each commercial brand was divided into three

Compressive fatigue in titanium dental implants submitted to fluoride ions action.

Only registered users can translate articles

The aim of this study was to assess the influence of a fluoridated medium on the mechanical properties of an internal hexagon implant-abutment set, by means of compression, mechanical cycling and metallographic characterization by scanning electronic microscopy. Five years of regular use of oral

Retraction. Effects of welding pulse energy and fluoride ion on the cracking susceptibility and fatigue behavior of Nd:YAG laser-welded cast titanium joints.

Only registered users can translate articles

A wireless fatigue monitoring system utilizing a bio-inspired tree ring data tracking technique.

Only registered users can translate articles

Fatigue, a hot scientific research topic for centuries, can trigger sudden failure of critical structures such as aircraft and railway systems, resulting in enormous casualties as well as economic losses. The fatigue life of certain structures is intrinsically random and few monitoring techniques

Fatigue failure of dental implants in simulated intraoral media.

Only registered users can translate articles

Metallic dental implants are exposed to various intraoral environments and repetitive loads during service. Relatively few studies have systematically addressed the potential influence of the environment on the mechanical integrity of the implants, which is therefore the subject of this study. Four

Fatigue of Self-Healing Nanofiber-based Composites: Static Test and Subcritical Crack Propagation.

Only registered users can translate articles

Here, we studied the self-healing of composite materials filled with epoxy-containing nanofibers. An initial incision in the middle of a composite sample stretched in a static fatigue test can result in either crack propagation or healing. In this study, crack evolution was observed in real time. A

Influence of 38% silver diamine fluoride application on bond stability to enamel and dentin using universal adhesives in self-etch mode.

Only registered users can translate articles

In order to evaluate the influence of 38% silver diamine fluoride (SDF) application on enamel and dentin bond stability of universal adhesives in self-etch mode, a 38% SDF and three universal adhesives were used in this study. Initial shear bond strength (ISBS), fatigue bond strength (FBS), and

Corrosion-fatigue of laser-repaired commercially pure titanium and Ti-6Al-4V alloy under different test environments.

Only registered users can translate articles

This study evaluated the corrosion-fatigue life of laser-repaired specimens fabricated from commercially pure titanium (CP Ti) and Ti-6Al-4V alloy, tested under different storage conditions. For each metal, 30 dumbbell rods with a central 2.3 mm diameter were prepared by lost-wax casting with the

Enhancement of dielectric and electric-field-induced polarization of bismuth fluoride nanoparticles within the layered structure of carbon nitride

Only registered users can translate articles

A single-pot, wet chemical method has been reported for the synthesis of bismuth fluoride nanoparticles (BF) and functionalized BF within the network of carbon nitride (BFCN). In BFCN, a structural transformation of BF, from cubic to pseudo-cubic (as evidenced by Rietveld refinement analysis),

Modeling of Structure Effect for Ferroelectric Capacitor Based on Poly(vinylidene fluoride-trifluoroethylene) Ultrathin Films.

Only registered users can translate articles

The characteristics of ferroelectric capacitors with poly(vinylidene fluoride-trifluoroethlene) (P(VDF-TrFE)) films have been studied at different structures of cell electrodes. It is suggested that the effect of electrode structures could induce changes of performance. Remarkably, cells with line

The effect of oral-like environment on dental implants' fatigue performance.

Only registered users can translate articles

OBJECTIVE The aim of this study was to evaluate the influence of fluid environment mimicking intra-oral conditions on fatigue performance of standard diameter, 3.75-mm implants. Dental implants placed intra-orally are repeatedly submitted to mastication loads in the oral environment, which differ

Join our facebook page

Herbal & Natural Medicine

The most complete medicinal herbs database backed by science

Works in 55 languages
Herbal cures backed by science
Herbs recognition by image
Interactive GPS map - tag herbs on location (coming soon)
Read scientific publications related to your search
Search medicinal herbs by their effects
Organize your interests and stay up do date with the news research, clinical trials and patents

Type a symptom or a disease and read about herbs that might help, type a herb and see diseases and symptoms it is used against.
*All information is based on published scientific research