Simultaneous removal of polycyclic aromatic hydrocarbons and heavy metals from natural soil by combined non-ionic surfactants and EDTA as extracting reagents: Laboratory column tests.

Simultaneous removal of three polycyclic aromatic hydrocarbons (acenaphthene, fluorene and fluoranthene) co-existing with three heavy metals (Ni, Pb and Zn) in artificially contaminated soil from the vicinity of an oil refinery was examined by column flushing of solutions containing Triton X-100 + Ethylenediaminetetraacetic acid (EDTA) and Tween 80 + EDTA at three levels of surfactant concentrations. While the effectiveness of both combined solutions in removal of heavy metals did not differ significantly, Triton X-100 + EDTA was more efficient in removing PAHs. Results showed that after 21 pore volume flushing of enhancing solution (Triton X-100 7.5% + EDTA 0.01 M) at flow rate of 0.534 mL min^-1 through the column with hydraulic conductivity of 8.5 × 10^-5 cm s^-1, 54, 47 and 40% of acenaphthene, fluorene, and fluoranthene were removed simultaneously. At the same conditions, 75, 85 and 90% of Pb, Ni and Zn, were also simultaneously removed. Increasing the flow rate of flushing solution decreased the removal efficiency of the contaminants.