10 hasil
The objective of this study was to investigate some physical/mechanical properties and formaldehyde emission of particleboard containing particles of waste stone pine cone at various usage ratios using urea-formaldehyde resin. Some physical (thickness swelling, water absorption), mechanical (modulus
This work studies phenol adsorption on Pinus pinaster bark that has been previously treated with formaldehyde in acid medium. The influence of several variables such as solid/liquid ratio, pH and initial concentration of phenol in the solution on the adsorption capacity of the bark has been
To evaluate the effects of phenol formaldehyde (PF) resin modification on wood cell walls, Masson pine (Pinus massoniana Lamb.) wood was impregnated with PF resin at the concentrations of 15%, 20%, 25%, and 30%, respectively. The penetration degree of PF resin into wood tracheids was
Formaldehyde pretreated Pinus pinaster bark was used to sorb Cd2+ and Hg2+ from aqueous solutions. The sorption kinetics showed hyperbolic dependence of the proportion of cation adsorbed on time, and the sorption isotherms were satisfactorily fitted by Freundlich equations, with k and n values
This work evaluates the feasibility of reacting tannins isolated from Pinus radiata D. Don bark with epoxide resins of the diglycidyl and polyglycidyl ether type. To this end, gel times of aqueous tannin dispersions (40% w/w) with every one of nine selected resins (5% w/w), at previously established
Pinus radiata bark and tannins, chemically modified with an acidified formaldehyde solution were used for removing metal ions from aqueous solutions and copper mine acidic residual waters. The adsorption ability to different metal ions [V(V), Re(VII), Mo(VI), Ge(IV), As(V), Cd(II), Hg(II), Al(III),
Despite the increasing importance of biomass pyrolysis, little is known about the pyrolysis behavior of lignin--one of the main components of biomass--due to its structural complexity and the difficulty in its isolation. In the present study, we extracted lignins from Manchurian ash (Fraxinus
Particleboard panels were made from various wood particle/needle litter of Scotch pine (Pinus sylvestris L.) mixtures bonded with urea formaldehyde resin. Litter was characterized by having higher solubility's in alcohol-benzene, with diluting alkali and hot water, and resulted in lower pH values
This research was conducted to investigate the suitability of peanut hull to produce general purpose particleboards. A series of panels were produced using peanut hull and mixture of peanut hull and European Black pine wood chips. Particleboards were manufactured using various hull ratios in the
Flavonoid compounds, which are extracted from bark and wood and used commercially, are flavan 3-ols as monomers and their polymers, which are called "condensed tannins". Reactions of the condensed tannins with formaldehyde are the basis for wood adhesives. In the late 1940s, tannin research for wood