A biomechanical study of bankart lesion fixation - biodegradable ArthroRivet tack vs. suture repair.

Bioabsorbable fixation is commonly used in soft tissue procedures performed in the shoulder. ArthroRivettrade mark tacks (referred to as rivets here), made from a copolymer of 82% poly-L-lactic acid and 18% polyglycolic acid, were developed for the Bankart procedure. Although a previous in vivo study demonstrated favorable comparison of the fixation strength and absorption characteristics of this device with that of polyglyconate bioabsorbable tacks, there have been no published biomechanical studies of this rivet in the shoulder. Fourteen shoulders were harvested from fresh-frozen cadavers of average age 74 years (46-89). Biomechanical testing was performed by measuring the energy, or work, required to anteriorly displace the humeral head 6 mm from the glenoid. Each shoulder was tested intact, vented, and before and after repair of a simulated Bankart lesion at 0, 45, and 90 degrees of abduction with and without maximal external rotation. Overall, the average work required ranged from 54.7 N-mm to 178.27 N-mm. Although the biomechanical performance of the rivet, based on resistance to anterior displacement of the humeral head, was indistinguishable from that of the suture repair, the statistical power of the test was low due to the large variance in the cadaver specimens. The results, in general, correlated well with those of previously published studies, suggesting the suitability of the bioabsorbable rivet for use in Bankart repair.